2014 John Deere ZTrak™ Z925M EFI Flex Fuel with 60 in. Deck

$7,200.00


New/Used
Used
Usage
206 Hours
Availability
In Stock
Location
Lakeview Hardware
Primary Color
GREEN
Trim Color
YELLOW
VIN
1TC925MCLEK020370
Title
Clean
Condition
Good
Year
2014
Manufacturer
John Deere
Model
ZTrak™ Z925M EFI Flex Fuel with 60 in. Deck

Overview

Description

With the M Series, we came up with machines that would please those customers with large fleets who demand efficiency. The Z925M EFI features an electronic fuel injected gasoline engine, optional Mulch On Demand decks, dump-from-seat MCS capability, and easy-to-use diagnostics.

  • 7-Iron™ PRO deck
  • Flex Fuel capable (E85)
  • Electronic fuel injection
Engine
  • Horsepower (gross) @ 3600 RPM: 25.0 HP (18.6 kW)
  • Displacement: 747 cc
  • Cylinders: Two
  • Crankcase Capacity: 2.0 U.S. quart (1.89 L) with filter
  • Oil Filter: Full flow, replaceable
  • Lubrication: Full pressure
  • Cooling: Air
  • Air Cleaner: Heavy-duty canister type with safety element
  • Pre-Cleaner: Yes
  • Model No.: FCV740
Fuel System
  • Fuel Type: Gas or ethanol blends up to E85
  • Fuel Tank Capacity: 11.5 U.S. gallons (43.5 L)
  • Fuel Tank Switch/Shut Off Valve: Yes
  • Fuel Consumption: 1.1-1.9 U.S. gal. (4.2-7.2 L/hr)
Electrical System
  • Charge System: 20 amp
  • Battery Voltage: 12 Volt
  • Cold Cranking Amp: 300
  • Hour Meter: Standard, digital
  • Operator Presence Starting System: Brake-N-Go (hand)
Drive Train
  • Hydraulic Pumps: Tuff Torq heavy-duty integrated piston pump
  • Wheel Motors: Tuff Torq heavy-duty integrated piston wheel motor
  • Travel Speed Forward: 0 - 10 mph (0-16.1 km/h)
  • Travel Speed Reverse: 0 - 4.5 mph (0-7.2 km/h)
  • Hydraulic Capacity: 5.9 U.S. qt (5.58 L)
  • Filter: Internal, replaceable
Brakes
  • Park Brake: Internal wet disk integrated in the transmission
  • Park Brake Actuation: Hand brake
  • Dynamic Braking: Twin levers
PTO
  • Type: Electro-magnetic (225 lb. ft.)
  • Drive: V-belt
Mower Deck
  • Available Width / Type: 60 in. (152.4 cm)
  • Deck construction: 7-Iron PRO (One-piece stamped steel with reinforcements)
  • Deck thickness: 7 gauge (0.177 in.)
  • Height-of-Cut Range / Increment: 1.0 in. to 5.5 in. (2.5 cm - 13.9 cm) / 0.25 in. / (.6 cm)
Blades
  • Tip Speed: Approximately 18,000 fpm
  • Number: Three
  • Thickness: 0.25 in. (0.64 cm)
Wheels and Tires
  • Drive (Rear) Tires: 24x12-12 Turf
  • Caster Wheel Type: Semi-pneumatic flat-free
  • Caster Wheel Size: 13x6.5-6
  • Front Anti-Scalp Rollers: RH, center, LH
  • Rear Anti-Scalp Rollers: Optional
Dimensions
  • Length: 84 in. (213.4 cm)
  • Width: 74 in. (188 cm) with chute down
  • Height: 73 in. (185.4 cm) with ROPS up; 47 in. (119.4 cm) with ROPS down
  • Weight: 1198 to 1291 lb. (543 to 586 kg)
Warranty
  • 2 year unlimited hours + 3rd year up to 1200 hours
NOTES:
Engine manufacturer certified gross power tested in accordance with SAE J1995. Actual operating horsepower and torque will be less. Refer to the engine manufacturer’s web site for additional information. Fuel Consumption Under normal conditions, load, operation, and dependent on loads and operating conditions

Specs

Engine

Horse Power
25.0 hp (18.6 kW)
Engine Type
Two cylinder
Displacement
747 cc

General

Transmission
Tuff Torq heavy-duty integrated piston pump and piston wheel motors
Wheel Size
Front: 13x6.5-6; Rear: 24x12-12 Turf
Fuel Capacity
11.5 gal. (43.5 L)

Deck

Deck Size
60 in. (152.4 cm)
Discharge Type
Side